QY-MB-H470-ATX
It adopts ATX (305*220mm) specification design and provides rich expansion interfaces such as PCI-E and PCI on the board.
PRODUCTS FEATURES
Motherboard chipset
Intel® H470
CPU
Intel® 10th Generation Core i3/5/7/9, Pentium® , Celeron® Processors, Comet Lake-S
Memory
2*DDR4, up to 64GB
Storage
3 * SATA 3.0 Connector and 1 * M.2 Key-M Slot
System
Windows 10(64bit), Linux
Introduce
Features
Specification
Jumper / Headers and Connectors
Introduce:
ATX Motherboard-Intel H470
1. Intel® 10th Generation Core i3/5/7/9, Pentium® , Celeron® Processors, Comet Lake-S
2. 2*Intel GBE LAN Chip (10/100/1000 Mbps,RJ-45 type)
3. 4 * USB2.0 (Header, Internal)
2. 2*Intel GBE LAN Chip (10/100/1000 Mbps,RJ-45 type)
3. 4 * USB2.0 (Header, Internal)
2 * USB3.0 (BOX Header, Internal)
1 * USB2.0 (TYPE-A, Internal)
6 * USB3.0 (TYPE-A, Rear IO)
4. 1 * RS232 (COM1, DB9/M)
4. 1 * RS232 (COM1, DB9/M)
3 * RS232 (COM2/5/6, BOX Header)
2 * RS232/RS485 (COM3/4, BOX Header)
5. 1 * DVI-D(DVI-I)+1 * HDMI 1.4b (TYPE-A)+1 * VGA (DB15/F)+1 * eDP
6. 3 * SATA 3.0 Connector + 1 * M.2 Key-M Slot
7. 1 * PCI-E 16x Slot
8. Windows 10(64bit), Linux5. 1 * DVI-D(DVI-I)+1 * HDMI 1.4b (TYPE-A)+1 * VGA (DB15/F)+1 * eDP
6. 3 * SATA 3.0 Connector + 1 * M.2 Key-M Slot
7. 1 * PCI-E 16x Slot
1 * M.2 Key-E Slot
1 * PCIE 4X Slot
4 * PCI Slot
1 * PCIE4X Slot (PCIE 4X, PCIE4X_3)
1 * PCIE4X Slot (PCIE 4X, PCIE4X_3)
Features:
Motherboard Chipset
Intel® H470, TDP 6W
CPU
Intel® 10th Generation Core i3/5/7/9, Pentium® , Celeron® Processors, Comet Lake-S
Support MAX CPU TDP: Hexa-Core 65W, Deca-Core 35W
Expansion Slots
1 * PCI-E 16x Slot
1 * M.2 Key-E Slot (PCIE+USB2.0, Support WIFI+ BlueTooth, 2230)
1 * PCIE4X Slot (PCIE 2X, PCIE4X_2)
4 * PCI Slot
1 * PCIE4X Slot (PCIE 4X, PCIE4X_3)
Size
305*220mm
RAM
Support DDR4- 2133/2400/2666/2933MHz, 2 * U-DIMM Slot, Up to 64GB
Storage
3 * SATA 3.0 Connector
1 * M.2 Key-M Slot
Rich I/O interfaces
2*LAN ports
13*USB ports
6*COM ports
1*HDMI+1*VGA
Temperature
Storage: -20~75℃
Operating: 0~60℃
Specification:
1.Models and Attentions
1.1 Models
This manual is applied to following models:
1.2 Attentions
1. Notes under a table or figure indicate the difference of models, or alternative definition of specific pin of the header (jumper/connector).
2. How to identify the first pin of a header or jumper
Usually, there is a thick line or a triangle near the header’s or jumper’s pin 1.
Square pad, which you can find on the back of the motherboard, is usually used for pin 1.
2.Specification
Notes:
[1]: Intel® H420E supports two independent displays. Intel® Q470 support three independent displays.
1.1 Models
This manual is applied to following models:
| Chipset | COM | LAN | USB | PCIE | PCI | M.2 KEY-E | M.2 KEY-M |
DVI | HDMI | VGA | eDP | SATA 3.0 |
| H470 | 6 | 2 | 13 | 1*16X 1*2X 1*4X | 4 |
PCIE+ USB2.0 | SATA | 1 | 1 | 1 | 1 | 3 |
1.2 Attentions
1. Notes under a table or figure indicate the difference of models, or alternative definition of specific pin of the header (jumper/connector).
2. How to identify the first pin of a header or jumper
Usually, there is a thick line or a triangle near the header’s or jumper’s pin 1.
Square pad, which you can find on the back of the motherboard, is usually used for pin 1.
2.Specification
| Model | QY-MB-H420E-ATX | QY-H470-ATX |
| CPU | Intel® 10th Generation Core i3/5/7/9, Pentium® , Celeron® Processors, Comet Lake-S, Support MAX CPU TDP: Hexa-Core 65W, Deca-Core 35W | |
| Chipset | Intel® H420E, TDP 6W | Intel® H470, TDP 6W |
| Dispaly[1] | 1 * DVI-D(DVI-I): Support DVI-D with max resolution up to 1920x1200@60Hz 1 * HDMI 1.4b (TYPE-A): Support max resolution up to 4096x2160@30Hz 1 * VGA (DB15/F): Support max resolution up to 1920x1200@60Hz 1 * eDP: Support max resolution up to 4096*2304@60Hz |
|
| Memory[2] | Support DDR4- 2133/2400/2666/2933MHz, 2 * U-DIMM Slot, Up to 64GB | |
| Storage[3] | 3 * SATA 3.0 Connector (Only Q470 support RST RAID 0,1,5,10) 1 * M.2 Key-M Slot (PCIE 2x/SATA, Default SATA, Support SATA SSD, 2242/2280) |
|
| Ethernet | 1 * Intel I219-V GBE LAN Chip (RJ45, 10/100/1000 Mbps) 1 * Intel I225-V GBE LAN Chip (RJ45, 10/100/1000 Mbps) |
|
| Audio | Realtek Audio HDA Codec, 1 * Line-Out + MIC + Line-In 3.5mm Jack 1 * Front Audio Header (Line-Out + MIC) 1 * SPDIF Out Header |
|
| Expansion Slots | 1 * PCI-E 16x Slot 1 * M.2 Key-E Slot (PCIE+USB2.0, Support WIFI+ BlueTooth, 2230) 1 * PCIE4X Slot (PCIE 2X, PCIE4X_2) 4 * PCI Slot |
|
| 1 * PCIE4X Slot (PCIE 1X, PCIE4X_3) | 1 * PCIE4X Slot (PCIE 4X, PCIE4X_3) | |
| COM | 1 * RS232 (COM1, DB9/M) 3 * RS232 (COM2/5/6, BOX Header) 2 * RS232/RS485 (COM3/4, BOX Header) |
|
| USB | 2 * USB2.0 (Header, Internal) 1 * USB2.0 (TYPE-A, Internal) 6 * USB3.0 (TYPE-A, Rear IO) |
4 * USB2.0 (Header, Internal) 2 * USB3.0 (BOX Header, Internal) 1 * USB2.0 (TYPE-A, Internal) 6 * USB3.0 (TYPE-A, Rear IO) |
| Other Ports | 8 * GPIO 1 * PS/2 Connector (Keyboard & Mouse) 1 * Front Panel Header 2 * System FAN Header 1 * CPU FAN Header 1 * SMBUS Header 1 * Case Open Header 1 * AT or ATX Select Jumper 1 * Power LED Header |
|
| TPM | Supports onboard TPM 1.2/2.0 (optional, not onboard by default) | |
| System | Windows 10(64bit), Linux | |
| Temperature | Storage: -20~75℃ Operating: 0~60℃ |
|
| BIOS | AMI UEFI BIOS (Support Watchdog Timer) | |
| Power Supply | ATX Standard (24P + 8P) 1 * ATX 8P CPU Power Input Connector 1 * ATX 24P Power Input Connector |
|
| Factory | 305mm * 220mm | |
Notes:
[1]: Intel® H420E supports two independent displays. Intel® Q470 support three independent displays.
[2]: The maximum memory frequency depends on CPU.
[3]: M2_M_PCIESSD1 and SATA1 share the same SATA3.0 signal, they can’t be accessed simultaneously (support M2_M_PCIESSD1 by default). And Q470 can support them both.
[4]: I219-V doesn’t support Intel AMT 12.0 and Intel vPro competent by default.
[5]: M2_M_PCIESSD1 and PCIE4X_1 share PCIE 2x signal, they can't be accessed simultaneously (support PCIE4X_1 by default). PCIE4X_2 and M2_E_WLAN1 share PCIE signal (support M2_E_WLAN1 by default). Q470 can support M2_E_WLAN1 and PCIE4X_2(PCIE-x4) both.
[6]: H420E not support F_USB3 and F_USB2 by default.
[3]: M2_M_PCIESSD1 and SATA1 share the same SATA3.0 signal, they can’t be accessed simultaneously (support M2_M_PCIESSD1 by default). And Q470 can support them both.
[4]: I219-V doesn’t support Intel AMT 12.0 and Intel vPro competent by default.
[5]: M2_M_PCIESSD1 and PCIE4X_1 share PCIE 2x signal, they can't be accessed simultaneously (support PCIE4X_1 by default). PCIE4X_2 and M2_E_WLAN1 share PCIE signal (support M2_E_WLAN1 by default). Q470 can support M2_E_WLAN1 and PCIE4X_2(PCIE-x4) both.
[6]: H420E not support F_USB3 and F_USB2 by default.
Jumper / Headers and Connectors:
| Jumpers / Headers and Connectors | ||
| 1 | F_USB3 | Front USB3.0 BOX Header |
| 2 | J_GPIO1 | GPIO Header |
| 3 | F_USB2 | Front USB2.0 Header |
| 4 | F_USB1 | Front USB2.0 Header |
| 5 | F_PANEL1 | Front Panel Header |
| 6 | J_COM2-6 | COM2-6 Headers |
| 7 | JC_COM2-6 | COM2-6 DCD/5V+ RI/12V Select Jumper |
| 8 | RS485_LOAD1-2 | COM3-4 RS485 Signal 120Ω Resistive Termination Select Jumper |
| 9 | JM_COM3-4 | COM3-4 RS232/RS485 Select Jumpers |
| 10 | JP_AT/ATX1 | AT or ATX Select Jumper |
| 11 | J_MCU1 | MCU Debug Header |
| 12 | WDT_EN1 | Watch Dog Reset Enable/Disable Select Jumper |
| 13 | J_ME1 | ME Flash Header |
| 14 | CLR_CMOS1 | CMOS Clear Select Jumper |
| 15 | J_DBG1 | LPC Debug Header |
| 16 | J_PWR_LED | Power LED Header |
| 17 | J_SMBUS1 | SMBus Wafer |
| 18 | J_COPEN1 | Case Open Header |
| 19 | SYS_FAN1-2 | System FAN1-2 Headers |
| 20 | J_PWR1 | Power Expand Wafer |
| 21 | PSON1 | Power On Wafer |
| 22 | CPU_FAN1 | CPU Fan Wafer |
| 23 | EDP1 | EDP Signal Header |
| 24 | JC_EDP1 | eDPVDD Select Jumper |
| 25 | EDP_P1 | eDP Backlight Control Header |
| 26 | JC_COM1 | COM1 DCD/5V+ RI/12V Select Jumper |
| 27 | F_AUDIO1 | Front Audio Header |
| 28 | F_SPDIF1 | SPDIF Out Header |
| 29 | JP_PCICLK1 | PCI CLK 66MHz Disable/ Enable Select Jumper |
| 30 | R_USB1 | USB2.0 TYPE-A Up-right Connector |
| 31 | M2_M_PCIESSD1 | M.2 Key-M Slot (PCIE 2x/SATA, Default SATA, Support SATA SSD, 2242/2280) |
| 32 | SATA1-4 | SATA3.0 Connector1-4 |
| 33 | ATX1 | ATX 24P Power Input Connector |
| 34 | DIMM1-2 | DDR4 CHA/B DIMM Slot |
| 35 | PCIEX16_1 | PCI-E 16x Slot |
| 36 | M2_E_WLAN1 | M.2 Key-E Slot (PCIE+USB2.0, Support WIFI+ BlueTooth, 2230) |
| 37 | ATX2 | ATX 8P CPU Power Input Connector |
| 38 | PCIE4X_2-3 | PCIE4X Slot1-2 |
| 39 | PCI1-4 | PCI Slot1-4 |
| 40 | KBMS_USB1 (PS/2) | PS/2 Connector (keyboard & mouse) |
| 41 | DVI_VGA1 (DVI) | DVI-I 24+4P/F Connector (Support DVI-D) |
| 42 | COM1 | COM1 Connector |
| 43 | RJ45_USB1-2 (LAN) | GBE LAN RJ45 Connector1-2 |
| 44 | KBMS_USB1 (USB) | Dual USB3.0 TYPE-A Connector |
| 45 | DVI_VGA1 (VGA) | VGA DB15 Connector |
| 46 | HDMI1 | HDMI TYPE-A Connector |
| 47 | RJ45_USB1-2 (USB) | Dual USB3.0 TYPE-A Connector1-2 |
| 48 | AUDIO1 | Line-Out + MIC + Line-In 3.5mm Jack |
Application:
Taxi
Explore solution
Related products
