X
X
QY-MB-Q470-ATX
It adopts ATX (305*244mm) specification design and provides rich expansion interfaces such as PCI-E and PCI on the board.
PRODUCTS FEATURES
Motherboard chipset Intel Q470
CPU Support Intel 10th/11th Generation Core / Pentium / Celeron Desktop CPU, LGA1200
Memory 4*DDR4, up to 128GB
Storage 4*SATA 2.0 7P Connector and 1*Mini-PCIE Slot (MSATA)
System Windows 10 64-bit, Linux
Introduce
Features
Specification
Jumper / Headers and Connectors
Introduce:
ATX Motherboard-Intel Q470
1. Support Intel 10th/11th Generation Core / Pentium / Celeron Desktop CPU, LGA1200
2. RJ45-USB1(RJ45): 1 * I219-LM GBE LAN Chip (10/100/1000 Mbps, RJ45)
    RJ45-USB2(RJ45): 1 * I211 GBE LAN Chip (10/100/1000 Mbps, RJ45)
3. 4 * USB3.0 (TYPE-A, Rear IO)
    2 * USB3.0 (Header, Internal)
    2 * USB2.0 (TYPE-A, Rear IO)
    1 * USB2.0 (Vertical TYEP-A, Internal)
    4 * USB2.0 (Header, Internal))
4. 1 * RS232 (COM1, DB9/M)
   3 * RS232 (COM2/5/6, Header)
   1 * RS232/RS422/RS485 (COM3, Header) 
   1 * RS232/RS485 (COM4, Header)
5. 1 * DVI-D (DVI-I)+1*HDMI (type-A)+1*VGA (DB15/F)+1*eDP(Header)
6. 4*SATA 3.0 7P Connector+1 * M.2 (NGFF) Key-M Slot 
7. 1 * PCI-E 16x Slot (PCIe 16X GEN3) +1 * PCI-E 16x Slot (PCIe 8X GEN3, no resources by default)
   3 * PCI-E 4x Slot (PCIe 4X GEN3)
   2 * PCI Slot
   1 * Mini PCI-E Slot (WIFI+4G/3G, with1 * Full-Size SIM Card Slot)
   1 * PCI CLK 66MHz Enable/Disable Select Jumper
   1 * PCI-E Signal Select Jumper
8. Windows 10 64-bit, Linux
Features:
Motherboard Chipset
Intel Q470
CPU
Support Intel 10th/11th Generation Core / Pentium / Celeron Desktop CPU, LGA1200 Support MAX CPU TDP: Deca-Core 125W
Expansion Slots
1 * PCI-E 16x Slot (PCIe 16X GEN3) 1 * PCI-E 16x Slot (PCIe 8X GEN3, no resources by default) 3 * PCI-E 4x Slot (PCIe 4X GEN3) 2 * PCI Slot 1 * Mini PCI-E Slot (WIFI+4G/3G, with1 * Full-Size SIM Card Slot) 1 * PCI CLK 66MHz Enable/Disable Select Jumper 1 * PCI-E Signal Select Jumper
Size
305*244mm
RAM
Support DDR4-2400/2666/2933/3200MHz, 4 * Non-ECC U-DIMM Slot, Up to 128GB
Storage
4*SATA 3.0 7P Connector 1 * M.2 (NGFF) Key-M Slot
Rich I/O interfaces
2*LAN ports 13*USB ports 6*COM ports 1*HDMI+1*VGA
Temperature
Storage: -20 ~75℃ Operating: 0~60℃
Specification:
1.Models and Attentions
1.1 Models
This manual is applied to following models:
 
Chipset COM LAN USB PCIE PCI DVI HDMI VGA eDP Mini- PCIE M.2
Key-M
SATA

Q470

6

2

13
1*16X 1*8X  3*4X
2

1

1

1

1

2

NVMe /SATA SSD

4


1.2 Attentions
1. Notes under a table or figure indicate the difference of models, or alternative definition of specific pin of the header (jumper/connector).
2. How to identify the first pin of a header or jumper
 Usually, there is a thick line or a triangle near the headers or jumpers pin 1.

 Square pad, which you can find on the back of the motherboard, is usually used for pin 1.


2.Specification
Model QY-MB-Q470-ATX
CPU Support Intel 10th/11th Generation Core / Pentium / Celeron Desktop CPU, LGA1200
Support MAX CPU TDP: Deca-Core 125W
Chipset Intel Q470,TDP 6W
Dispaly 1 * DVI-D (DVI-I): Support max resolution up to 1920*1200@60Hz
1*HDMI (type-A): Support max resolution up to 4096x2160@30Hz
1*VGA (DB15/F): Support max resolution to 1920*1200@60Hz
1*eDP(Header): Support max resolution up to 4096x2304@60Hz
Memory Support DDR4-2400/2666/2933/3200MHz, 4 * Non-ECC U-DIMM Slot, Up to 128GB
Storage 4*SATA 3.0 7P Connector
1 * M.2 (NGFF) Key-M Slot (PCIe x4 NVMe/ SATA SSD Auto Detect, 2242/2280)
Ethernet RJ45-USB1(RJ45): 1 * I219-LM GBE LAN Chip (10/100/1000 Mbps, RJ45)
RJ45-USB2(RJ45): 1 * I211 GBE LAN Chip (10/100/1000 Mbps, RJ45)
Audio Realtek HDA Codec,
1 * Front Audio Header (Line-Out + MIC) 
1 * SPDIF Out Header
1 * Line-out + Line-in + MIC 3.5mm Jack
Expansion
Slots
1 * PCI-E 16x Slot (PCIe 16X GEN3) [5]
1 * PCI-E 16x Slot (PCIe 8X GEN3, no resources by default) [5]
3 * PCI-E 4x Slot (PCIe 4X GEN3)
2 * PCI Slot
1 * Mini PCI-E Slot (WIFI+4G/3G, with1 * Full-Size SIM Card Slot)
1 * PCI CLK 66MHz Enable/Disable Select Jumper
1 * PCI-E Signal Select Jumper
COM 1 * RS232 (COM1, DB9/M)
3 * RS232 (COM2/5/6, Header)
1 * RS232/RS422/RS485 (COM3, Header) 
1 * RS232/RS485 (COM4, Header)
USB 4 * USB3.0 (TYPE-A, Rear IO)
2 * USB3.0 (Header, Internal)
2 * USB2.0 (TYPE-A, Rear IO)
1 * USB2.0 (Vertical TYEP-A, Internal)
4 * USB2.0 (Header, Internal))
Other Ports 8 * GPIO
1 * PS/2 Connector (Keyboard & Mouse)
1 * Front Panel Header (HDD LED+PWR LED+PWR ON+RESET)
1 * Port80 Debug Header
1 * SMBUS Header
2 * System FAN Header
1 * CPU FAN Header
1 * Case Open Header
1 * CMOS Clear Jumper
1 * AT or ATX Select Jumper
1 * ME Flash Header
1 * Data Burning Header
TPM 1*TPM2.0 (Not onboard by default), Support Intel PTT Default
System Windows 10 64-bit, Linux
Temperature Storage: -20 ~75℃
Operating: 0~60℃
BIOS AMI UEFI BIOS (Support Watchdog Timer)
Power Supply ATX Standard (24P + 8P + 4P)
1 * ATX 4P CPU Power Input Connector 1 * ATX 8P CPU Power Input Connector 1 * ATX 24P Power Input Connector
Size 305mm * 244mm
 

Notes:
         1.Intel Q470 supports three independent displays.
           2. The maximum memory frequency depends on CPU.
          3.RJ45-USB1 (RJ45) I219-LM supports Intel AMT 12.0 and Intel vPro competent. RJ45-USB2 (RJ45)
supports I211 by default and can support I210 if specified.
          4.PCIEX16-SLOT1-2 slot support PCIE 16x or dual PCIE 8x is Selected by   PCI-E Signal Select Jumper’(J-PEG-CFG1, Location 33). It also can support auto detected if specified. (BOM selection)
Jumper / Headers and Connectors:


 
Jumpers / Headers and Connectors
1 SYS-FAN1 System FAN Header1
2 SYS-FAN2 System FAN Header2
3 J-GPIO1 GPIO Header
4 F-USB2-2 Front USB2.0 Header2
5 F-USB2-1 Front USB2.0 Header1
6 F-PANEL1 Front Panel Header
7 JP12 COM2 DCD/RI Select Jumper
8 COM2-6 COM2/3/4/5/6 Header
9 JP8 COM3 DCD/RI Select Jumper
10 J-LPC1 Port80 Debug Header
11 J ME1 ME Flash Jumper
12 JP9 COM4 DCD/RI Select Jumper
13 JP7 COM4 RS232/485 Select Jumper
14 J-AT/ATX1 AT or ATX Select Jumper
15 JP10 COM5 DCD/RI Select Jumper
16 JP11 COM6 DCD/RI Select Jumper
17 SMBUS1 SMBUS Header
  18    JP6 COM3 RS232/422/485 Select Jumper3
19 JP1 CMOS Clear Jumper
20 J-COPEN1 Case Open Header
21 J2 Data Burning Header
22 JP5 COM3 RS232/422/485 Select Jumper2
23 JP4 COM3 RS232/422/485 Select Jumper1
24 F-USB3-1 Front USB3.0 Header
25 CPU-FAN1 CPU FAN Header
26 EDP-P1 eDP Backlight Control Header
27 JP2 eDP VDD Select Jumper
28 EDP1 eDP Signal Header
29 JP3 COM1 DCD/RI Select Jumper
30 F-AUDIO1 Front Audio Header (Line-Out + MIC)
31 JP13 SPDIF Out Header
32 JP14 PCI CLK 66MHz Enable/Disable Select Jumper
33 J-PEG-CFG1 PCI-E Signal Select Jumper
34 M.2-PCIESSD-M1 M.2 (NGFF) Key-M Slot (PCIe x4 NVMe/SATA SSD, 2242/2280)
35 MPCIE1 Mini PCI-E Slot (WI FI +4G/3G)
36 SIM1 Full-Size SIM Card Slot
37 SATA1-2/3-4 SATA3.0 7P Upright Connector1-2/3-4
38 USB2-1 USB2.0 Internal Vertical TYPE-A Connector
39 ATX1 ATX 24P Power Input Connector
40 DIMM2/DIMM4 DDR4 CHB DIMM Slot2/4
41 DIMM1/DIMM3 DDR4 CHA DIMM Slot1/3
42 ATX2 ATX 8P CPU Power Input Connector
43 ATX3 ATX 4P CPU Power Input Connector
44 PCIE-16X-SLOT1 PCI-E 16x Slot1 (PCIe 16X GEN3) [1]
45 PCIE-4X-SLOT1 PCI-E 4x Slot1 (PCIe 4X GEN3)
46 PCI1 PCI Slot1
47 PCIEX16-SLOT2 PCI-E 16x Slot2 (PCIe 8X GEN3) [1]
48 PCIE-4X-SLOT2 PCI-E 4x Slot2 (PCIe 4X GEN3)
49 PCI2 PCI Slot2
50 PCIE-4X-SLOT3 PCI-E 4x Slot3 (PCIe 4X GEN3)
51 PS/2-USB1(PS/2) PS/2 Connector (Keyboard & Mouse)
52 DVI-VGA1(DVI-D) DVI-I 24+4P/F Connector (Support DVI-D)
53 COM1 COM1 DB9/M Connector
   54    RJ45-USB2 (RJ45) GBE LAN RJ45 Connector2
55 RJ45-USB1 (RJ45) GBE LAN RJ45 Connector1
56 PS/2-USB1(USB) Dual USB2.0 TYPE-A Connector
57 DVI-VGA1(VGA) VGA DB15/F Connector
58 HDMI1 HDMI TYPE-A Connector
59 RJ45-USB2 (USB) Dual USB3.0 TYPE-A Connector2
60 RJ45-USB1 (USB) Dual USB3.0 TYPE-A Connector1
61 AUDIO1 Line-Out + MIC + Line-In 3.5mm Jack

          

Notes:
          [1]: When PCIEX16-SLOT2 access device, PCIE-16X-SLOT1 will change to PCIe 8X (Auto detected). And it also can be enforced by  PCI-E Signal Select Jumper’(J-PEG-CFG1, Location 33)
 
Application: